• Cut the hardboard sheet to fit the back of the hardwood frame. Example is 14”x24”.
  • Frame and hardboard edges should be flush.
  • Use rough side of hardboard as bottom of stacker unit.
  • Nail on hardboard back to frame with paneling nails.
  • Nail edges, using paneling nails, to connect back to frame.
  • Notice the rough side of the hardboard is the bottom of the stacker unit.
  • 16 nails were used in the example shown.
POOR MAN'S STACKERS
© BILL & DARICE RAGAN
2008 ALL RIGHTS
RESERVED
THE
FRAME
POOR MAN’S STACKERS
NEXT